Updated Nov 20, 2026· 7 min read

Our Top Picks

  1. beyerdynamic DT 990 Pro250 OHM8.7 x 4.7 x 9.1 inches0.9 pounds
    Check on Amazon
  2. Sennheiser HD 599 Open-Back Wired Audiophile HeadphonesNormal8.1 x 3.95 x 10.25 inches1.6 pounds
    Check on Amazon
⭐ Key Takeaways
Quick answer: Our top pick is beyerdynamic DT 990 Pro (250 Ohm), with Sennheiser HD 599 as a strong alternative.

Closed-back headphones keep sound in and room noise out, which makes them the right tool while a microphone is live. Mixing and editing are different jobs. When you are balancing levels, placing instruments in a stereo field and judging reverb tails, an open-back design usually gives a wider, more natural presentation that is easier to trust for long sessions at a desk.

This guide compares five open-back studio headphones that home producers reach for again and again: the beyerdynamic DT 990 Pro, the Sennheiser HD 560S, the Sennheiser HD 599, the AKG K612 PRO and the Philips X2/27 Fidelio. They differ in impedance, cable design and fit, and those differences matter more than brand loyalty when you are matching a pair to your interface and your room.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

For most home studios, the beyerdynamic DT 990 Pro in the 250 ohm version is the classic mixing reference, provided your interface or headphone amp can drive it. The Sennheiser HD 560S is the easier-running neutral option, the AKG K612 PRO offers a very wide stage at a light weight, the HD 599 favors comfort, and the Philips X2/27 brings big 50 mm drivers.

beyerdynamic DT 990 Pro (250 Ohm)

beyerdynamic DT 990 Pro (250 Ohm) Open-Back Studio Headphones

beyerdynamic DT 990 Pro (250 Ohm) Open-Back Studio Headphones

Check price on Amazon

The DT 990 Pro has been a fixture in project studios for decades, and the 250 ohm version is the one most often recommended as a mixing reference. Its open-back cups produce a spacious stereo image that makes panning decisions and reverb depth easier to judge than on most closed-back models at a similar level.

The trade-offs are clear. The 250 ohm impedance means a phone or a weak laptop output will leave it quiet and thin sounding, so plan on a proper audio interface or headphone amplifier. The cable is fixed rather than detachable, which is the main ownership compromise. Velour pads keep it comfortable through long editing sessions, and the pads are replaceable when they eventually wear down.

Specs

  • Type: open-back, over-ear, wired
  • Impedance: 250 ohms
  • Frequency response: 5 to 35,000 Hz
  • Cable: fixed coiled cable, about 3 m
  • Connector: 3.5 mm plug with screw-on 6.35 mm adapter
  • Weight: about 250 g without cable
  • Ear pads: velour, replaceable

Sennheiser HD 560S

The HD 560S is Sennheiser’s answer for listeners who want a neutral, reference-style tuning without the cost of the company’s flagship open-back models. Its E.A.R. (Ergonomic Acoustic Refinement) design angles the drivers to recreate the triangular listening position of a pair of loudspeakers, which helps mixes translate in a familiar way.

At 120 ohms it is far easier to drive than the 250 ohm and 470 ohm designs in this guide, and most interfaces will run it comfortably. The cable detaches, which makes replacement simple if it is ever damaged. If your studio work leans toward editing, podcast production and balanced mixing rather than bass-heavy genres, the HD 560S is a sensible centerpiece.

Specs

  • Type: open-back, over-ear, wired
  • Impedance: 120 ohms
  • Frequency response: 6 Hz to 38 kHz
  • Cable: detachable; exact length, confirm on the listing
  • Connector: 3.5 mm plug with 6.35 mm adapter
  • Model number: 509144
  • Weight: confirm on the listing

Sennheiser HD 599

Sennheiser HD 599 Open Back Headphone, Ivory

Sennheiser HD 599 Open Back Headphone, Ivory

Check price on Amazon

The HD 599 sits at the top of Sennheiser’s 500 series and leans toward comfort and an easygoing presentation. Large ear cups and soft, replaceable pads make it a good match for producers who spend hours editing takes, comping vocals or arranging tracks and want a headphone they can forget they are wearing.

Its 50 ohm impedance is the friendliest in this guide, so it runs well from interfaces, mixers and even modest portable devices. Sennheiser includes two detachable cables in the box, a long one ending in a 6.3 mm plug for studio gear and a shorter one with a 3.5 mm plug for everyday devices, which saves swapping adapters between tasks.

Specs

  • Type: open-back, over-ear, wired
  • Impedance: 50 ohms
  • Frequency response: 12 to 38,500 Hz
  • Cables: detachable 3 m cable with 6.3 mm plug, plus 1.2 m cable with 3.5 mm plug
  • Weight: 250 g
  • Model number: 506831
  • Ear pads: soft, replaceable

AKG K612 PRO

AKG Pro Audio K612 PRO Open-Back Reference Studio Headphones

AKG Pro Audio K612 PRO Open-Back Reference Studio Headphones

Check price on Amazon

The K612 PRO is AKG’s reference open-back model for monitoring and mixing, built around a self-adjusting headband that floats the ear cups in place without manual sizing. At 235 g it is the lightest headphone in this guide, which matters during marathon sessions.

Its soundstage is notably wide, which suits producers checking stereo placement and room ambience in recordings. The 120 ohm impedance sits in the middle of this group: most interfaces drive it well, though very low-powered outputs may leave it short of volume. The cable is fixed at about 3 m, so like the DT 990 Pro it asks you to accept a non-detachable lead in exchange for the rest of the package.

Specs

  • Type: open-back, over-ear, wired
  • Impedance: 120 ohms
  • Frequency response: 12 to 39,500 Hz
  • Cable: fixed, about 3 m
  • Connector: 3.5 mm plug with screw-on adapter
  • Weight: 235 g
  • Model number: 2458X00100
  • Headband: self-adjusting design

Philips X2/27 Fidelio

Philips X2/27 Fidelio Headphones, Black

Philips X2/27 Fidelio Headphones, Black

Check price on Amazon

The Fidelio X2/27 is the home-listening entry in this group, built around 50 mm neodymium drivers in an open-back housing. It is often picked by producers who split their time between making music and simply enjoying it, since the same spacious presentation that helps with mixing also suits long listening sessions.

At 30 ohms it is the easiest headphone here to drive and works from almost any source, including controllers, portable recorders and phones with a headphone jack. The cable is detachable, which keeps it practical as a daily-use pair. If your production work is mostly arrangement, editing and casual mix checks rather than critical mastering decisions, the X2/27 covers that ground well.

Specs

  • Type: open-back, over-ear, wired
  • Drivers: 50 mm neodymium
  • Impedance: 30 ohms
  • Frequency response: 5 Hz to 40,000 Hz
  • Cable: detachable; exact length, confirm on the listing
  • Connector: 3.5 mm, with 6.3 mm adapter included per listing
  • Weight: confirm on the listing

How to Choose

Start with impedance, because it decides whether your current gear can drive the headphones properly. As a working rule, pairs rated at 80 ohms or below, like the HD 599 and the Fidelio X2/27, run happily from almost any interface, mixer or device. Models between 100 and 150 ohms, such as the HD 560S and the K612 PRO, suit typical audio interfaces. A 250 ohm model like the DT 990 Pro really wants an interface or headphone amp with a strong output, so budget for that if you do not already own one.

Next, think about the room. Every open-back headphone leaks sound outward and lets room noise in. That is fine in a quiet home studio and a real problem in a shared space, and it rules all five of these out for tracking vocals or instruments near a live microphone. If you record as well as mix, keep a closed-back pair for tracking and use the open-back pair for editing and mixing.

Cables and comfort decide long-term satisfaction. Detachable cables, on the HD 560S, HD 599 and X2/27, are cheaper to replace than a full headphone. Fixed cables, on the DT 990 Pro and K612 PRO, are one less connection to fail but cannot be swapped. Finally, weight and pad style matter more than most spec sheets suggest: the K612 PRO at 235 g and the velour-padded DT 990 Pro are both built for hours at a desk.

Who Should Skip

Skip open-back headphones entirely if you record with a microphone in the same room, since the leaked sound will reach the mic and color your takes. Also skip them if your studio shares a wall with sleeping family members, or if you work in a noisy environment where outside sound would compete with quiet passages in your mix.

Skip the high-impedance picks, the DT 990 Pro in particular, if you plan to listen straight from a phone or a basic laptop output with no interface in between. And if your priority is portable use, travel or commuting, none of these wired, open designs is the right tool; look at closed-back or wireless models instead.

FAQ

Can I use open-back headphones for recording vocals?

No. Open-back cups leak the backing track into the room, and a sensitive condenser microphone will pick that leakage up. Use a closed-back pair while tracking, then switch to open-back headphones for editing and mixing.

Do I need a headphone amplifier for these models?

It depends on impedance. The 30 ohm Fidelio X2/27 and 50 ohm HD 599 run from most sources. The 120 ohm HD 560S and K612 PRO work well from typical audio interfaces. The 250 ohm DT 990 Pro benefits from a dedicated headphone amp or a strong interface output.

Are open-back headphones better for mixing than closed-back?

For judging stereo width, depth and reverb, open-back designs generally present a more natural soundstage, which many mixers prefer. They are not automatically more accurate, though, and a familiar closed-back pair you know well can still produce reliable mixes.

Why do these headphones have no Bluetooth or noise cancelling?

All five are wired studio tools. A cable avoids wireless latency and compression, and open-back construction cannot provide meaningful noise isolation by design. Those features belong to travel and lifestyle headphones, not mixing references.

Final Verdict

For a dedicated home mixing desk with a decent interface, the beyerdynamic DT 990 Pro remains the reference pick in this group. If your setup is simpler, the Sennheiser HD 560S gives a neutral presentation that is easier to power, while the AKG K612 PRO is the light, wide-stage alternative. The HD 599 is the comfort-first choice for long editing days, and the Philips X2/27 Fidelio suits producers who want one open-back pair for both work and relaxed listening.

C
CB Online Music Gear Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Open-Back Studio Headphones: 5 Picks for MixingCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.