Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare the best microphone cases for singers and home studios, from a six-mic ATA hard case to compact foam cases that keep one mic safe on the road.
⭐ Key Takeaways
Quick answer: Our top pick is CASEMATIX Wireless Microphone System Hard Case with Foam, with Gator Cases GTSA-MICW6 ATA Molded Case for Six Wireless Microphones as a strong alternative.

A microphone is one of the easiest pieces of gear to damage and one of the most annoying to replace the night before a show. Dynamic vocal mics survive a lot, but their grilles dent and their capsules can rattle loose after repeated drops, and condenser mics are far less forgiving. Tossing a mic into a backpack leaves it knocking against cables, clips, and power supplies for the whole trip.

A dedicated microphone case fixes that with a shaped foam home for each mic, a shell or padded wall between the mic and the rest of your gear, and room for the clip and cable that belong with it. The five cases below cover the main ways singers, karaoke hosts, worship teams, and home recordists actually move microphones: a customizable hard case for a full wireless system, an ATA-style case for six wireless mics, a sealed waterproof case, a soft six-mic bag, and a compact pick-and-pluck foam case for a single mic or a small recorder kit.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

For most singers and karaoke hosts, start with the CASEMATIX Wireless Microphone System Hard Case: its pre-diced foam adapts to a receiver, handheld mics, and body packs from most major brands. If you fly with six wireless mics, step up to the Gator GTSA-MICW6. For one mic in a gig bag, the compact CASEMATIX foam case costs little space and keeps the mic from rattling around loose.

CASEMATIX Wireless Microphone System Hard Case with Foam

CASEMATIX Wireless Microphone System Hard Case with Foam

CASEMATIX Wireless Microphone System Hard Case with Foam

Check price on Amazon

This is the case to shortlist when your rig is a wireless system rather than a single wired mic. The hard shell is blow-molded plastic, and inside is a tri-layer foam stack with a pre-diced middle layer, so you pluck out cubes to build pockets that match your receiver, handheld microphones, headset or lavalier pieces, and body pack transmitters instead of forcing your gear into fixed slots cut for someone else’s kit.

The listing names compatibility with wireless systems from Sennheiser, Shure, Audio-Technica, Nady, VocoPro, and AKG, which covers most of the systems used for karaoke nights, church services, and mobile DJ work. A rugged bolted-on handle suits the walk from car to venue, and the interior space is sized for accessories that fit within roughly fourteen by nine by four inches, so measure a large receiver before ordering.

Specs

  • Shell: hard blow-molded plastic exterior
  • Interior: tri-layer foam with a customizable pre-diced middle layer
  • Exterior size: about sixteen by thirteen by six inches
  • Weight: about two and a half pounds
  • Fit: wireless systems with receiver, handheld, headset, and lavalier mics
  • Brands named on the listing: Sennheiser, Shure, Audio-Technica, Nady, VocoPro, AKG

Gator Cases GTSA-MICW6 ATA Molded Case for Six Wireless Microphones

Gator Cases GTSA-MICW6 ATA Molded Case for Six Wireless Microphones

Gator Cases GTSA-MICW6 ATA Molded Case for Six Wireless Microphones

Check price on Amazon

Gator’s GTSA-MICW6 is built for the person who carries the whole vocal rig for a band or a production: six wireless microphones, each with its own molded foam drop, plus six battery compartments so spare cells travel with the mics instead of in a separate pouch. The shell is molded polyethylene, the construction style Gator uses across its ATA flight-case line.

The latches are TSA-accepted locking latches with impact diversion housings and a red release trigger, which matters if the case ever goes through checked baggage or a venue security check: inspectors can open it without destroying the latch, and the case still locks for everyone else. An ergonomic molded grip handle is built into the shell. Each mic drop is about ten and a quarter inches long, so check the length of longer handheld transmitters before you commit.

Specs

  • Shell: molded polyethylene ATA-style construction
  • Capacity: six wireless microphones plus six battery compartments
  • Mic drop length: about ten and a quarter inches per slot
  • Latches: TSA-accepted locking latches with red release trigger
  • Handle: ergonomic injection-molded grip
  • Exterior size and weight: confirm on the listing

SKB iSeries Waterproof Microphone Case

SKB iSeries Waterproof Microphone Case

SKB iSeries Waterproof Microphone Case

Check price on Amazon

SKB’s iSeries cases are the pick when water is a real risk: outdoor festivals, beach weddings, boat gigs, or a van that leaks. The shell is ultra-high-strength polypropylene copolymer resin, and a gasket seal makes the closed case watertight and dust-tight, so a rainstorm during load-in stops being a threat to the mics inside.

An ambient pressure equalization valve lets the case adjust to air-pressure changes during flights without stressing the seal, and the trigger-release latch system opens easily with gloves on while staying shut through drops and stacking. The foam interior is shaped for microphones with room for accessories. Because SKB sells several iSeries mic configurations, confirm the exact mic count and interior dimensions on the listing before ordering.

Specs

  • Shell: ultra-high-strength polypropylene copolymer resin
  • Seal: gasket-sealed, watertight and dust-tight when closed
  • Valve: ambient pressure equalization valve
  • Latches: trigger-release latch system
  • Handle: over-molded padded carrying handle
  • Capacity and interior dimensions: confirm on the listing

On-Stage MB7006 Six-Space Microphone Bag

On-Stage MB7006 Six-Space Microphone Bag

On-Stage MB7006 Six-Space Microphone Bag

Check price on Amazon

Not every mic run needs a flight case. The On-Stage MB7006 is a padded soft bag with thick foam inserts shaped for up to six handheld microphones, which makes it a sensible home for a karaoke host’s mic set, a school or church vocal team, or a rehearsal space that moves mics between two rooms rather than two cities.

Separate compartments with a removable hook-and-loop divider give cables and clips their own space, and a zippered mesh pocket in the lid holds the small items that usually vanish: batteries, windscreens, set lists. You give up the crush protection of a molded shell, so this bag rides best in a car trunk or on top of other gear, not underneath a speaker cabinet.

Specs

  • Type: padded soft microphone bag
  • Capacity: up to six handheld microphones
  • Interior: thick foam inserts, removable hook-and-loop divider
  • Storage: separate accessory compartments, zippered mesh lid pocket
  • Carry: twin handles and adjustable shoulder strap
  • Exterior size: about sixteen by nine by twelve inches; about two pounds

CASEMATIX 12-Inch Customizable Foam Case for Portable Electronics

CASEMATIX 12-Inch Customizable Foam Case for Portable Electronics

CASEMATIX 12-Inch Customizable Foam Case for Portable Electronics

Check price on Amazon

The smallest option here is a briefcase-style hard case with a pre-diced foam interior, sold for portable electronics but sized and shaped in a way that suits a single microphone, a compact recorder, or a small podcast kit. You pluck the foam cubes to outline your mic, its clip, and a short cable, and the egg-crate foam in the lid holds everything still.

The exterior is a dense composite plastic hard shell with heavy-duty latches, and padlock rings on the shell accept small locks for a little extra security at shared venues. At under twelve inches long it slides into a backpack or tote, which is exactly how most home recordists and traveling singers actually carry one mic. The listing shows a pink color option among its variants, so check the selected color and size on the listing before ordering.

Specs

  • Shell: dense composite plastic hard shell exterior
  • Interior: pre-diced customizable foam with egg-crate foam lid
  • Exterior size: about eleven by seven and a quarter by two and three-quarter inches
  • Weight: about one and a fifth pounds
  • Security: padlock rings for small locks, locks not included
  • Carry: briefcase-style handle; case only, microphone not included

How to Choose a Microphone Case

Start with a count and a measurement. Count every microphone that travels together, then measure the longest one, including a wireless handheld with its antenna or a condenser in its shock mount. A case whose foam drops are shorter than your longest mic is the wrong case no matter how good the shell is, so compare your measurement against the interior dimensions or slot length on the listing.

Next, choose the protection level that matches the trip. A padded bag is enough for mics that ride in your own car and live on a shelf at home. A molded hard case earns its keep when gear gets stacked, shipped, or checked. A gasket-sealed waterproof case is for outdoor and travel work where rain or dust is a genuine risk, not a remote one.

Then look at the interior style. Fixed foam drops are faster: drop the mics in and go. Pre-diced pick-and-pluck foam takes a few minutes of planning but fits odd combinations, like a receiver plus a headset plus a handheld, that no fixed layout anticipates. Finally, check the extras you will actually use: battery compartments if you run wireless, a cable pocket if the bag is your whole kit, and TSA-accepted latches if the case will ever fly.

Who Should Skip These Cases

Skip this roundup if your microphones never leave a stand in one room; a dust cover or the pouch the mic came with is enough protection for a mic that lives in a home studio. Skip the big multi-mic cases if you own exactly one microphone, since the empty foam slots just add bulk to every trip. Skip soft bags entirely if your gear rides in a shared trailer or gets stacked under PA speakers, because padding alone will not stop a crush load. And skip any case, however rugged, if your microphone is a large studio condenser that must travel mounted in its shock mount; those need a case with a deep, tall interior cut for that shape, so confirm the fit on the listing or choose a model made for that microphone.

Frequently Asked Questions

Will these cases fit a Shure SM58 or SM57?

Yes, standard handheld dynamic mics of that size fit every case here. The CASEMATIX wireless system case and the On-Stage bag are shaped around handheld mics, the Gator drops accept typical wireless handhelds, and the small CASEMATIX foam case can be plucked to outline a single SM58-size mic with its clip.

Can a wireless receiver travel in the same case as the microphones?

In the CASEMATIX wireless system case, yes: its customizable foam is meant to hold a receiver alongside handheld, headset, or lavalier microphones and body packs. In the Gator and SKB multi-mic cases the foam is cut mainly for microphones, so a receiver may need the accessory area; confirm the layout on the listing.

Is a waterproof case worth it for indoor gigs?

Usually not. Indoors, a padded bag or a standard hard case gives you the drop and knock protection that matters, and the sealed case adds weight and cost. Waterproofing pays off for outdoor events and storage in damp spaces.

What should I do if my microphone is longer than the case slots?

Do not force it or cut fixed foam drops deeper, since a mic pressed against the lid loses its protection and can bend at the connector. Choose a case with a longer listed slot length, or pick a pre-diced foam case and build a longer channel, checking the interior length on the listing first.

Final Verdict

For a complete wireless rig, the CASEMATIX Wireless Microphone System Hard Case is the most flexible buy, because its pluck foam adapts as your system changes. For flying or touring with six wireless mics, the Gator GTSA-MICW6 adds ATA construction and TSA-accepted locks. The SKB iSeries is the weatherproof step up, the On-Stage MB7006 is the light-duty six-mic bag for local runs, and the small CASEMATIX foam case suits one mic that travels in a backpack. Measure your longest mic, count your kit, and match the case to the trip it will actually take.

C
CB Online Music Gear Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Microphone Cases for Gigs, Travel and Storage…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.