Key takeaways
- Thrash and speed metal reward 25.5 inch scales, thin necks and tremolo or fixed bridges that stay in tune; death, doom and metalcore reward 7-strings, baritones and heavier strings.
- Lower tunings need heavier strings. A 7-string set such as 10-56 or 11-64 is a normal starting point, not an extreme one.
- The entry tier (Ibanez GRG131DX, Jackson JS22 DKA) is a legitimate way to start; the mid tier (Ibanez RGA42FM, Schecter Omen Elite-7) fixes hardware and playability; the EC-1000 and Hellraiser sit higher.
- Pickups matter more than most upgrades: active EMG-type pickups give a compressed, tight attack; passive high-output humbuckers keep more dynamics.
The best guitars for metal share three traits: high-output humbuckers, a fast neck with 24 frets, and a bridge that stays in tune when you hit it hard. For most players that points to an Ibanez RG-style shred guitar for thrash, a Jackson Dinky for an affordable all-rounder, a Schecter Hellraiser or Omen for metalcore and drop tunings, and an ESP LTD EC-1000 when you want a thick, sustaining Les Paul-style tone. The right pick depends more on your subgenre and tuning than on the brand name.
Our top picks
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Key takeaways
- Thrash and speed metal reward 25.5 inch scales, thin necks and tremolo or fixed bridges that stay in tune; death, doom and metalcore reward 7-strings, baritones and heavier strings.
- Lower tunings need heavier strings. A 7-string set such as 10-56 or 11-64 is a normal starting point, not an extreme one.
- The entry tier (Ibanez GRG131DX, Jackson JS22 DKA) is a legitimate way to start; the mid tier (Ibanez RGA42FM, Schecter Omen Elite-7) fixes hardware and playability; the EC-1000 and Hellraiser sit higher.
- Pickups matter more than most upgrades: active EMG-type pickups give a compressed, tight attack; passive high-output humbuckers keep more dynamics.
Quick comparison: best metal guitars by subgenre
| Guitar | Strings | Scale | Bridge | Best subgenre | Tier |
|---|---|---|---|---|---|
| Ibanez GRG131DX | 6 | 25.5 in | Fixed or tremolo per listing | Beginner metal | Entry |
| Jackson JS22 DKA Dinky | 6 | 25.5 in | Fixed | Thrash and hard rock | Entry |
| Ibanez RGA42FM | 6 | 25.5 in | Fixed | Thrash, metalcore | Mid |
| Schecter Omen Elite-7 | 7 | 25.5 in | Fixed | Death metal, metalcore | Mid |
| ESP LTD M-207B DX | 7 | 25.5 in | Fixed | Modern extended-range | Entry to mid |
| Schecter Hellraiser C-1 FR | 6 | 25.5 in | Floyd Rose-style | Metalcore, shred | Upper-mid |
| ESP LTD EC-1000 | 6 | 24.75 in | Tune-o-matic | Doom, sludge, heavy rock | Upper-mid |
1. Ibanez GRG131DX: Best beginner metal guitar
- Infinity R humbucking pickups with a 5-way selector, per the listing
- 24 jumbo frets and a slim neck aimed at rock, metal and practice
- 25.5 inch scale, standard for the RG family
- Black flat finish that hides fingerprints
Best for: a first guitar for a teenager who wants to play Metallica and Slayer riffs. Skip if: you plan to tune below drop D regularly; the stock hardware will fight you.
Pros: the cheapest credible route into the RG shape; 24 frets for solos; easy to tune up and set up; sits inside the budget band for “best beginner metal guitars” and the under-$500 category.
Cons: basic tuners and bridge; pickups can sound thin through high gain; limited resale.
2. Jackson JS22 DKA Dinky Arch Top: Best under $500 for thrash
- Arch top Dinky body in satin black or metallic finishes
- Maple neck with compound-radius amaranth fingerboard, per the listing
- Two humbuckers · 24 frets · 25.5 inch scale
- Fixed bridge for simple tuning stability
Best for: riff-driven thrash and hard rock on a tight budget. Skip if: you want active pickups out of the box.
Pros: compound radius gives flatter feel at the upper frets for solos; fixed bridge means few tuning issues; sits comfortably in the under-$500 band.
Cons: basic pickups; finish quality reflects the tier; will benefit from a setup.
3. Ibanez RGA42FM: Best mid-tier shred and metalcore six-string
- RGA body with an arched top and flame-maple finish option (Blue Lagoon Burst Flat on the listing)
- 25.5 inch scale · 24 frets · slim RG-style neck
- Fixed bridge for stable drop tunings · humbucker pickups
Best for: metalcore and thrash players who want a fast neck and stable tuning. Skip if: you want a Les Paul-style thick tone.
Pros: fast neck; fixed bridge holds tuning well in drop D and drop C; good looks for the tier; sits near the upper end of the “under $500” class.
Cons: thin neck is not for everyone; tone is on the bright side without pickup changes.
4. Schecter Omen Elite-7: Best 7-string for death metal and metalcore
- 7-string version of the Omen Elite (Charcoal on the listing)
- 25.5 inch scale for tension on the low B
- Fixed bridge and humbuckers suited to low tunings
Best for: death metal and metalcore players who want a low B string. Skip if: you are new to 7-strings and prefer a six-string.
Pros: usable low-B response at a mid tier, in the under-$1000 band; fixed bridge for stable tuning.
Cons: wider neck takes adjustment; string sets cost more.
5. ESP LTD M-207B DX: Best entry-level extended-range
- 7-string LTD M-200 series, See-thru Black Satin (listing)
- Bolt-on construction with a fixed bridge · 25.5 inch scale
- Lower price tier than the Schecter or Ibanez 7-strings
Best for: players who want a 7-string without a big outlay. Skip if: you want a set neck or active pickups.
Pros: low entry cost for a 7-string; satin finish feels fast; widely supported brand.
Cons: fewer premium features; pickups may need an upgrade for tight low-end.
6. Schecter Hellraiser C-1 FR: Best for metalcore with a tremolo
- C-1 body, mahogany with a figured top on typical specs · 25.5 inch scale
- Floyd Rose-style tremolo (“FR” in the name) for dive bombs and tuning stability when set up properly
- Hellraiser lines have used active EMG humbuckers on standard models and passive sets on Hybrid models, so verify the listing
- Black Cherry finish on a listing; multiple Hybrid variants exist
Best for: metalcore, shred and modern metal players who want a locking trem. Skip if: you dislike locking-trem maintenance.
Pros: stage-ready look; locking trem; sits in the upper-mid tier.
Cons: Floyd Rose setups are harder to restring; pickup specs vary by variant.
7. ESP LTD EC-1000: Best for doom, sludge and thick rhythm
- Mahogany-style Les Paul-shape body with a set neck · 24.75 inch scale
- Versions listed with EMG, Seymour Duncan and Fluence pickups
- Tune-o-matic bridge on most versions, a Floyd version also listed
Best for: doom, sludge and heavy rock players who want sustain and a thick midrange. Skip if: you want a thin, fast neck.
Pros: set neck and a shorter scale loosen string tension, which suits low tunings; versions for different pickup preferences.
Cons: weight; sits above the under-$1000 band on most listings.
Also consider
- Ibanez RGDRB71 Iron Label: a 7-string with a nyatoh body, roasted maple neck and ebony fingerboard on the listing; a modern djent and death-metal option.
- Schecter Damien Platinum 7: a 7-string with a metal-focused look at a lower tier than Hellraiser.
- Jackson JS32 Rhoads: a V-shaped guitar for classic heavy metal looks.
- Schecter Sunset-7 Extreme baritone: a 7-string baritone for extremely low tunings.
Best metal guitars by subgenre: what each style asks of the guitar
Best thrash metal guitars
Thrash is about fast, palm-muted downpicking and tight rhythm. That calls for a fast neck, stable fixed bridge and humbuckers with firm low-end. The Ibanez RGA42FM and Jackson JS22 DKA match this brief. Use a .010 to .046 set in E standard or drop D and keep your picking close to the bridge for chunk.
Best death metal guitars
Death metal often drops to C or B and extends to 7-string. A longer 25.5 inch scale gives the low strings tension and definition. The Schecter Omen Elite-7 and ESP LTD M-207B DX are the pragmatic choices. Pair them with a 7-string set such as 10-56 or 11-64 so that the low B does not flop.
Best doom metal guitars
Doom wants weight, sustain and a slightly loose feel at low tunings. The EC-1000 with its 24.75 inch scale and set neck suits this style. Use heavier strings (.011 to .052 or more) when tuning down to avoid flabby low strings.
Best metalcore guitars
Metalcore mixes heavy rhythm with melodic leads and often uses drop tunings. The Hellraiser C-1 FR and Schecter Omen Elite-7 fit this style; look for active pickups if you want a clipped, compressed attack.
Best heavy metal guitars
Classic heavy metal still lives on twin-humbucker guitars with fast necks and moderate gain. The Dinky and RG styles suit it, and a Rhoads or EC-1000 offers a more classic look.
Best metal guitars under $1000 and under $500
Within the under-$500 class, the Ibanez GRG131DX, Jackson JS22 DKA and Ibanez RGA42FM are the realistic picks, with the first two at the lower end of the band and the RGA42FM near the upper end. In the under-$1000 band, the Schecter Omen Elite-7 and ESP LTD M-207B DX give you extended range without breaking the budget. The Hellraiser C-1 FR and the EC-1000 sit above this band, so treat them as step-ups rather than starter purchases.
Pickups, strings and tunings: a working reference
| Tuning | Typical string set | Scale advice | Pickup advice |
|---|---|---|---|
| E standard | .009 to .042 or .010 to .046 | Any 24.75 to 25.5 in | Passive or active humbuckers |
| Drop D | .010 to .052 | 25.5 in preferred | High-output humbuckers |
| Drop C or C standard | .011 to .056 or heavier | 25.5 in, or 24.75 in with heavier strings | Tight low end, active optional |
| 7-string, low B | 10-56 or 11-64 sets exist (Ernie Ball and D’Addario list both) | 25.5 in or longer | Pickups voiced for 7-strings |
| Baritone range | Manufacturer baritone sets | 26.5 in and up | Baritone-specific pickups |
Bridges: fixed, tune-o-matic or locking tremolo
A fixed bridge is the most stable and simplest to maintain, which is why entry and mid-tier metal guitars use it. A tune-o-matic with a stopbar is similar and adds adjustability, as on the EC-1000. A locking tremolo such as a Floyd Rose-style unit allows dive bombs and keeps its tuning when well set up, but restringing takes longer and the guitar needs a proper setup. Beginners should start with a fixed bridge.
How to match strings to your tuning: a step-by-step method
Most “my metal guitar sounds floppy” complaints come from running a light string set in a low tuning. Use this routine to choose a set before you buy the guitar, so you can budget for the right strings and setup. It uses general string-maker guidance, such as the 10-56 and 11-64 seven-string sets that Ernie Ball and D’Addario list, and not our own experiments.
- Write down the tuning you will actually use most. If it is drop D, you can live with a normal set. If it is drop C, C standard or B standard, you need heavier gauges.
- Note the scale length of the guitar. A 25.5 inch scale carries more tension than a 24.75 inch scale on the same strings. The EC-1000 feels looser than an RG for the same set.
- Pick a heavier gauge as you tune down. A common progression is .010 to .046 for E standard, .010 to .052 for drop D and .011 to .056 or heavier for drop C. On a 7-string, the sets are built around a thicker low B.
- Ask for a setup after changing gauge. Heavier strings pull the neck forward, so the truss rod, nut slots and bridge height usually need adjusting.
- Check the nut slots. A nut cut for light strings will pinch heavy ones and cause tuning problems. A tech can widen the slots.
- Re-evaluate after a week. Strings stretch and necks move, and a second small adjustment often finishes the job.
Metal pickup guide: active, passive, ceramic and Alnico
| Type | What you hear | Good for | Trade-off |
|---|---|---|---|
| Active humbucker (EMG-style) | Compressed, very tight attack, low noise | Death metal, metalcore, fast palm muting | Needs a 9-volt battery; less dynamic |
| Passive high-output ceramic | Aggressive, bright, gritty | Thrash and hard rock | Can sound harsh through some amps |
| Passive Alnico humbucker | Warmer, smoother, more dynamic | Doom, sludge, classic heavy metal | Less clipped attack |
| Coil-split capable humbucker | Adds clean single-coil tones | Players who mix clean passages | Slight volume drop when split |
For beginners, the pickup is rarely the first thing to change. A good setup and a correct string gauge improve a guitar more than a new pickup does. Upgrade pickups after you know which tone you are pursuing and whether your amp or the guitar is the limiting factor.
Setup for low tunings: what to ask a technician
- Neck relief: a little more relief for heavier strings and aggressive picking prevents fret buzz on the low strings.
- Action: slightly higher action on the low strings keeps tight, palm-muted notes from rattling.
- Intonation: re-set intonation after any gauge change, especially on a 7-string where the low B is sensitive.
- Nut and tuners: lubricate the nut slots, and consider locking tuners if the guitar has a tremolo.
- Tremolo block and springs: on a locking tremolo, balance spring tension to the new gauge.
- Electronics: check pots, jack and shielding to cut noise in high-gain use.
Amps and pedals for the best metal guitars
A metal guitar needs to be paired with an amp that handles low frequencies tightly. Many players run a tube-screamer-style overdrive in front of a high-gain amp or modeler; the pedal cuts low-end flub before it reaches the gain stage, so palm mutes stay clear. A noise gate cleans up the gaps between riffs. Cabinet choice matters too: a closed-back 4×12 gives tight bass, while a smaller open-back cabinet will sound looser. If you play at home, a modeler with cabinet simulation and headphones saves your neighbors and gives you plenty of tones.
Bolt-on, set-neck and neck-through: what construction does for metal
Neck construction changes both feel and tone. A bolt-on neck, used on the Ibanez GRG131DX, Jackson Dinky and ESP LTD M-series guitars, is easy to adjust and replace and gives a snappy attack. A set neck, as on the EC-1000, is glued into the body for a smoother joint and a rounder, sustaining sound. A neck-through design runs the neck wood the full length of the guitar; it is common on higher-end shred and extended-range models, including the Ibanez Iron Label RGRTB621 that appears among related listings, and it favors upper-fret access and sustain. None is automatically better. Bolt-on guitars cost less and are very popular for tight rhythm; set-neck guitars suit thick, singing leads; neck-through guitars are for players who solo high on the neck and want the longest sustain.
Body weight matters for long rehearsals. Mahogany bodies are heavier and can strain a shoulder; basswood and poplar bodies are lighter. If you play standing for an hour or more, a wide padded strap is as important as a pickup upgrade.
Ownership realities: what wears first on a metal guitar
Metal guitars take a beating. Frets wear first on the strings you play most; stainless frets resist this, and any guitar can be re-fretted. The output jack and pots wear next; a loose jack or crackling volume pot is a quick repair. Tremolo systems need periodic attention: knife edges, springs and bridge posts can shift. Active pickups depend on a battery, so unplug the cable when you are not playing to avoid draining it. Finally, black finishes and satin necks show sweat and oil, so a soft cloth after each session keeps the guitar looking fresh.
Six-string or seven-string: which should a metal player choose?
A seven-string adds a low B below the usual low E, which opens up chords and riffs that a six-string cannot reach without detuning. The cost is a wider neck, a higher string cost and a slightly steeper learning curve. If your favorite bands play in drop C or lower, a seven-string in standard tuning (with a low B) can be easier to live with than a six-string tuned down. If you mostly play thrash, classic heavy metal or metalcore in drop D or drop C, a six-string with the right gauge is simpler and cheaper. A sensible path is to start on a six-string, learn the style, and add a seven-string such as the Schecter Omen Elite-7 or ESP LTD M-207B DX when you know that you need the extra range. Do not buy a seven-string simply because it looks more serious; the string count should match the music you actually play.
How We Chose
We did not play or handle these guitars ourselves. The shortlist comes from published specs, listing details and general guidance on string gauges and tunings from string makers. Where we could not confirm a particular specification, such as the pickups in a Hellraiser variant, we say so and point to the listing. We chose guitars that cover the main metal subgenres, with a beginner option, 7-string options and a Les Paul-style option, and we kept at most two guitars per brand in the main list.
Buying guide: how to choose among the best guitars for metal
Scale length
A 25.5 inch scale gives tighter strings and better definition at low tunings. A 24.75 inch scale gives a looser feel and rounder tone. For drop C and lower on a six-string, choose 25.5 inches or use heavier strings.
Neck profile and frets
A thin, flat neck helps speed; a thicker neck helps comfort in long sessions. Twenty-four frets give extra range for solos.
Pickups
Active pickups are tight and compressed; passive high-output pickups are more dynamic. Ceramic magnets give more bite; Alnico gives smoother response.
Bridge and hardware
Choose fixed bridges for stability and easy tuning. Use locking tuners if you choose a tremolo.
Strings and setup
Choose strings to match your tuning and have the guitar set up for them. Many tuning problems on cheap guitars come from a mismatch between string gauge and setup, not from the guitar itself.
Amp and effects
Your guitar is half of the sound. A tight overdrive in front of a high-gain amp sharpens palm-muted riffs. A noise gate keeps single-coil hum and high-gain hiss under control.
Left-handed note
Some models are available in left-handed versions, though the selection is smaller.
Frequently Asked Questions
What are the best guitars for metal?
Ibanez RG-style, Jackson Dinky, Schecter Hellraiser and ESP LTD EC-1000 guitars are the standard options, each suited to a different subgenre and budget.
What are the best beginner metal guitars?
The Ibanez GRG131DX and Jackson JS22 DKA are good beginner choices because they have 24 frets, humbuckers and simple hardware.
What are the best metal guitars under $500?
The Ibanez GRG131DX, Jackson JS22 DKA and Ibanez RGA42FM are popular options in this band.
What are the best guitars for death metal?
A 7-string with a 25.5 inch scale, such as the Schecter Omen Elite-7 or ESP LTD M-207B DX, suits low tunings.
What are the best guitars for doom metal?
The ESP LTD EC-1000 with a set neck and 24.75 inch scale is a thick, sustaining option.
Do I need active pickups for metal?
No. Active pickups give a tight, compressed attack, but passive high-output pickups are also common in metal.
Is a 7-string necessary for metal?
No. It is useful for very low tunings or extended range, but six-strings with heavy strings cover most styles.
Which one should you buy?
Buy the Ibanez GRG131DX to start. Buy the Jackson JS22 DKA for budget thrash. Buy the Ibanez RGA42FM for a faster, mid-tier six-string. Buy the Schecter Omen Elite-7 or ESP LTD M-207B DX for a 7-string. Buy the Hellraiser C-1 FR for a locking trem. Buy the EC-1000 for doom and heavy rhythm.
Sources
- Ibanez product pages
- Jackson product pages
- Schecter Guitar Research product pages
- ESP and LTD product pages
- Ernie Ball and D’Addario string set listings
Last updated: October 2026.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!